PureLink by Dtrovision
6
Installation and Connection Instructions
1.
Turn off both the video source and the display before connecting any cables.
2.
Connect CATx cable between the DCE II transmitter and the DCE II receiver.
3.
Connect DVI cable between the source and the DCE II transmitter and the DCE II
receiver and the display.
4.
Connect the power supply unit to DCE II transmitter (only if video source does
not output enough power to the transmitter).
5.
Turn on Display.
6.
Turn on Video Source.
How to terminate CATx cable
DCE II was designed to conform to TIA/EIA-568-B standard. Please ensure that each PIN
layout of DCE II transmitter and DCE II receiver are corresponding with the picture
below before connecting the cable. Please note that CAT5e or above level cable enables
to deliver better video quality and longer distance.
CATx cable
Link cable recommend use high quality CAT5e, CAT6, CAT6a, CAT7 UTP / STP or FTP
cable.
Pin
Wire color
Digital RGB
1
Orange/ White
TMDS DATA2 +
2
Orange
TMDS DATA2 -
3
Green/ White
TMDS CLOCK +
4
Blue
TMDS DATA1 +
5
Blue/ White
TMDS DATA1 -
6
Green
TMDS CLOCK -
7
Brown/ White
TMDS DATA0 +
8
Brown
TMDS DATA0 -
