3
CLEANING & MAINTENANCE
1. Do not use detergents, soap or wet cloth to clean the external parts. Use dry and soft
cloth to clean the front cover. It is recommended to use a 3M mop cloth for this.
2. Clean the dispenser by using disinfectants like bleach/hypochlorite (50 PPM available
chlorine). Discard 2 litres of water after cleaning the dispenser.
3. Do not use any cleaning solution to clean the Digital Display Panel. Damages ensuing
thereof are not covered under warranty.
Storage Tank
1. Discard the water in the storage tank once in 15 days.
2. Drain the water in the storage tank if purifier is not used for 2 days.
3. Clean the storage tank once a month with disinfectant solution. To purchase this
solution, call us at 1860-210-1000 now.
4. How to clean the tank: Open the cleaning solution dispenser and put 1 ml of the
disinfectant solution (10–15 drops) into the storage tank. (Ensure the tank is full).
Drain the entire tank after 10 minutes.
5. No foreign material (like dust/ants/insects/other pests) should enter the storage tank.
The filtered water in the storage tank may deteriorate in the process.
Dispenser
6. The point-of-use reverse osmosis drinking water treatment systems addressed by NSF-58
standard are designed to be used for the reduction of specific substances that may be
present in drinking water supplies (public or private) which are considered to be
microbiologically safe and are of known quality.
7. The output water may continue to have flora which are harmless and pose no health
hazard to normal healthy adults and children.
STEP 1 :
Close the ball valve
before opening ESF
housing for cleaning
STEP 5 :
Clean the Sediment Filter
under jet of water,
rub by hand / tap gently
to clean
STEP 6 :
After cleaning the Filter,
put it back in the housing
and then put the grey
coloured Carbon Sleeve
back into the housing
STEP 8 :
Connect the water
inlet tube to the housing
STEP 2 :
Remove the water
inlet tube which is
attached to the housing
STEP 3 :
Rotate the housing
clock-wise and remove it
completely from the cap
STEP 4 :
Take out the grey
coloured Carbon Sleeve
and the Sediment Filter
from the housing
STEP 7 :
Insert the housing inside
the cap and rotate it
anticlockwise to engage
the threads Ensure the
housing is tightened till
it’s original marking
Sediment Filter
