5
TECHNICAL SPECIFICATIONS
1
4.8 ~ 5.2 under running water conditions.
2
Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality,
TDS, pressure and life of Filter elements.
3
Input water quality and TDS content are important determinants of output water quality.
4
If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost.
If the pressure is less than 10 PSI then you need to buy ‘Pressure enhancing pump’ at an additional cost.
Device should not be installed in a house where input pressure is greater than 60 PSI.
Post-RO Carbon Filter fitted in the device may need to be changed intermittently at extra cost in case you face smell issues.
Technical specifications are subject to change or improvement without prior notice.
5
In case the TDS is >1000 PPM, a company provided anti-scalant is recommended to be installed
This has to be purchased at extra cost.
6
This is based on standard consumption of 10 litres per day, with an input TDS of 750 PPM, 25° water and 18 PSI
pressure. Depending on the variation from above you may need to change the GKK / parts even before the stipulated time.
PUREIT ADVANCED PLUS RO+MF+MP
Model
Pureit Advanced Plus RO+MF+MP
Dimensions (HXWXD)
380mm x 166mm x 423mm
Weight (Complete Unit)
6.8 Kg
Flow Rate
Upto 10-12 LPH
Storage Tank Capacity
5 Litres
1
6 Stage Purifying Technology
Pre-Sediment Filter, Pre-RO Carbon Filter,
Mini Filter, Reverse Osmosis Membrane,
Micro Filtration Membrane and Post-RO
Carbon Filter
Membrane Type
Thin film composite spiral wound
Pump Type
Diaphragm pump, 24V DC
% Recovery
2
Typically 25%
TDS Reduction
3
90% (min.)
Input Water
PH range 6.5-8.5,
Temperature range 10°C- 40°C
Power Rating
36 Watts
Pressure Rating
10-30 PSI
4
Input Voltage
100-300 V a.c., 50 Hz
Material of construction
Food safe, non-toxic plastics
for plastic parts
Length of Power Cord
1.5 metres
Total Dissolved Solids in
Up to 2000 mg/lit
5
input water
Total Hardness
500 mg/lit (max.)
Iron in Input Water
0.3 mg/lit (max.)
Turbidity in Input Water
1 NTU (max.)
Germkill Kit
TM
(GKK)
Material of Construction
Food safe, non-toxic plastics
GKK
Pre-Sediment Filter - 1 No.
Pre-RO Carbon Filter - 1 No.
Post-RO Carbon Filter - 1 No.
Mini Filter - 1 No.
RO Membrane - 1 No.
Micro Filtration (MF) Membrane - 1 No.
Germkill performance standard
Meets stringent international criteria for
microbiologically safe drinking water
- e.g. Environmental Protection Agency (EPA),
USA
Ordering GKK
There is 1 Sediment Filter (SF) and 1 Germ Kill Kit (GKK) in the device that need to
be replaced periodically.
SF
May require cleaning/replacement basis the
water quality
GKK
Needs to be replaced approximately every
1 year
6
from the date of installation
Please call 1860-210-1000 for ordering your HUL Pureit GKK to
ensure safe drinking water, always!
