PUREGAS, LLC
P200W Series Dehydrator User’s Guide
Page 71 of 82
P012026 – Rev. F
WARNING!
Extreme care should be exercised to avoid contact with live
electrical circuits.
Many procedures performed during
installation, operation, and testing of this Dehydrator require the
equipment to be running, creating a situation for potential electrical
shock. It is highly recommended that you remove all jewelry
before performing any procedures.
CAUTION!
Incoming power to Dehydrator must be:
•
10 amp service recommended
•
24 VDC for P200W model (7 Amp slow blow fuse)
•
48 VDC for P208W model (7 amp slow blow fuse)
•
85 - 264 VAC, 1 Phase for P200WA model
(5 amp slow blow fuse)
CAUTION!
Using the pressure relief valve equipped with this unit as the only
means of over pressurization protection for the connected system is
not advised.
