Installation Instructions:
1. Remove the product from its packaging and
inspect the rope, connection rings and the seat to
ensure there is no fraying to the rope or damage to
the seat and/or the connection rings.
2. Carefully inspect your existing attachment hooks
and/or hardware on your swing set.
*Replace any damaged, rusted, or broken parts
before installation.
*It is strongly recommended that the rings on the
Swing Seat rope should be attached to swing set
hardware that has a nylon bushing where the
existing hook will pivot. If this hardware is not
present on your set, you should add hooks with this
bushing (sold separately.)
3. Once attached, adjust the height of the Swing Seat
using the height adjustment buckles located near
the top of each rope end. You must ensure that the
Seat is level. This Swing Seat should never be hung
so that it is less than 8” from the ground or more
than 2 feet (24”) above the ground.
4. Before use, test your connections by using steady,
sufficient downward force on the Swing Seat. It is
recommended that you test the Swing Seat
connections at multiple swing positions to insure
against possible slippage of the connectors due to
faulty hardware or installation.
5. Once you are certain that the product is installed
properly. You may begin using it. Use caution and
judgement when supervising your child’s use of
this product. Always pay attention to the speed and
angle of your child’s swing to prevent accidents.
NEVER exceed 75 LBS.
ADULT INSTALLATION REQUIRED:
This Swing Seat is intended for use only as a
replacement seat for a swing set and/or installation
on an existing structure intended for use as such.
Attachment hooks and hardware may be required
(sold separately).
ASSEMBLY INSTRUCTIONS
4