A
1:
Turn the power to the electrical box off.
2:
Connect the white transformer wire to the neutral power
wire with a wire nut.
3:
Connect the black transformer wire to the hot power wire
with a wire nut.
4:
Place the transformer and transformer wires inside the
electrical box.
Install the Canopy
1
B
5:
Connect each Fast Jack assembly wire to one low voltage
transformer wire with a wire nut.
Installation Instructions for
Fast Jack Power Round & Square 4" Flat
Canopies
SAVE THESE INSTRUCTIONS!
- This product is ETL listed for indoor dry locations.
- This product is dimmable with a standard ELV dimmer.
- The product can be installed to a 4" electrical box with
round plaster ring, or to an octagon electrical box.
- Minimum electrical box volume must be 6 cubic inches (98
cubic centimeters).
IMPORTANT INFORMATION
1718 W. Fullerton Chicago, IL 60614
Ph: 773.770.1195 ● Fax: 773.935.5613
www.PureEdgeLighting.com ● [email protected]
© 2016 PureEdge Lighting. All Rights Reserved.
Doc # 904-FJP-4RD_03
TRANSFORMER
3
2
4
ELECTRICAL
BOX
5
5
FAST JACK
ASSEMBLY
FJP-4_-_
