CHILDREN LOCK BUTTON
HUMIDITY SET BUTTON
TIMER BUTTON
EN
13
Press this button to set the humidity level. The user can set the level between
30%-80% by step 5%. While the adjustment is taking place, the count after 80%
returns to 30%. Press and hold this button for 4 second, and the room
temperature will apear.
By pressing this button for 4 seconds, the Lock panel function enables. In this
function no button is working. In order to return to the previous state, hold the
Lock button for another 4 seconds.
Press the ''Timer'' button to set the time which the dehumidifier will start or end its
operation. The Timer indicator and the screen will light up. The user can set the
time between 1-24 hours with step every 30 minutes. The the timer set value is
"00", it means that the Timer is disabled.
MODE SELECTION
By pressing the mode button, the user choose between auto mode or dryer mode.
AUTO MODE
In this mode the relative humidity level is 50% and the fan operates at high speed
mode. Press the HUM set button to adjust the relative humidity level to your
preference between 30% and 80% by 5% step each time you press the HUM button.
After 5 seconds of inaction the setting is saved.
DRYER MODE
When the function is selected, the fan operates in high speed mode. The user
cannot change the fan speed between LOW and HIGH. During this function the
compressor operates continuously, despite the relative humidity level of the room.
For drying clothes place the dehumidifier in a small room nearby the clothes rack
and close the door. The machine should be at a distance of 40-50cm from the
clothes rack and not beneathe them. For a quick result, clothes should be wringed
out good.
S
LEEP
mode / R
ESET
mode button
By pressing this button, the SLEEP function is activated. The dehumidifier operates
in LOW fan speed, and adjust the relative humidity between 57%-63%. It is no
allowed to change the fan speed or the relative humidity level.
By pressing and holding the SLEEP button, the RESET function is activated. In this
way the Filter change indicator is reset.
