PURE ETRANCE+, Owner'S Manual

Page: 10 / 54

PURE Electric Vehicle
PuR Energy Pvt Ltd |6
Driving your PURE ETrance Plus:
•
Take ETrance Plus off the side stand.
•
Check for the recommended tyre pressure (30-35 psi) for smooth running.
•
Sit on the ETrance Plus and ensure the battery is charged.
•
Turn on the Ignition key (Clockwise).
•
Press the parking button on the right-hand side (with
“P”
symbol).
•
Slowly twist the throttle to get the ETrance Plus moving.
•
It is mandatory to use a safety helmet to ensure a safe ride.
•
The vehicle should not be overloaded by putting on more load than recommended.
Do’s and Don’ts while riding:
•
The power to the motor cuts when brakes are applied. Do not hold on to the brakes when you want
the ETrance Plus to run.
•
It is strongly advised to not apply sudden brakes on wet, sandy surfaces.
•
Avoid sudden short braking for both self-safety as well as health of the brake lines.
•
While going down a steep slope, do not accelerate.
•
It is advisable to use both the brakes for smooth braking and better balancing.
•
Although the motor is water resistant, it is advisable to avoid driving in waterlogged areas, especially
in exposure to electricity and electric components to avoid short-circuiting.
•
Avoid frequent driving of the vehicle at very low battery condition.