
9
EN
B]^^iT()$&
Snooze an alarm
When an alarm is sounding press the
Snooze
button to silence the alarm for ten minutes (the
default snooze time). The remaining time left until the alarm sounds again is shown at the
bottom of the display. Hold the
Snooze
button down to cancel snooze.
Setting the Alarms
Chronos iDock has four alarms. When activated, an alarm either switches the radio on (if in
standby) and tunes to a DAB or FM radio station, activates and plays your iPod (if docked) or
sounds a beeping alarm tone.
Set an alarm
1. Press
the
Alarm
button and repeat to select the alarm you wish to adjust (1-4).
This will start the alarm setup.
0[Pa\#BTcd_
0[Pa\>]
2. Using
the
Navigation dial
, set the following options for your alarm:
On/Off
Toggle the alarm on or off
On time
Set the time you want the alarm to start (hours:mins)
Source
Choose DAB, FM, iPod or tone as the sound source you want to
use for the alarm
Last Used/
For DAB and FM source, choose a station for the alarm to play.
Preset
‘Last Used’ will tune to the last station received by the radio.
‘Preset’ lets you select one of your saved stations.
Once
The alarm will sound at the time you have selected and not
repeat.
Daily
Every
day
Weekdays
Monday-Friday, every week
Weekends
Weekends (Sat-Sun) only
Finally, adjust the volume level for the alarm (represented by a bar on-screen) using the
Navigation dial
and push to confirm.
That’s it! You can see which alarms are currently switched on by looking at the numbered
alarm icons on the screen.
For
example:
APSX^!
0\hbcTahc^dac
Alarm 1 is
currently set