To Clean the Boiling Chamber:
1. Turn the power switch to the OFF position.
2. If the unit has been operating, allow it to cool for 30
minutes from the end of the distillation cycle.
3. Carefully remove the boiling chamber from the unit.
CAUTION:
The boiling chamber will get hot and could
cause a burn if the unit has not been allowed to cool.
4. Remove the boiling chamber lid (4).
5. Drain any residual water inside the boiling chamber (1).
6. Fill the boiling chamber to the water level indicator (2).
7. Add Lumen
™
Cleaner (stock #6603) to the boiling
chamber. Follow instructions on the label.
Note:
DO NOT replace the boiling chamber back into the
unit during the cleaning process DO NOT allow the unit to
operate with the Lumen Cleaner in the boiling chamber.
Replacing the Carbon Filter
A carbon filter (8) is used to finish or polish the water, and
to improve the taste. The carbon filter should be replaced
approximately every 3 months, or whenever the water
develops a taste. The carbon filter is custom designed for
the Pure Water Mini Classic CT distiller.
To Replace the Carbon Filter:
1. Remove the drinking water container (10) from the unit.
2. Remove the old filter by sliding the filter housing (9)
and filter (8) towards you or removing it from the
opening in the drinking water container.
3. Immerse the new carbon filter (8) in a
separate container filled with distilled
water for one minute.
4. Remove the soaked filter
and place it into the filter
housing.
5. Slide the new filter and
housing back into the
guide.
11
