Pure Water Fountain Classic, Installation And Owner'S Manual

Page: 12 / 20

Page 12 Fountain Classic Owner’s Manual
Step 4 Step 4 Step 4 Step 4 Step 4 Turn the dispensing unit on: Turn the dispensing unit on: Turn the dispensing unit on: Turn the dispensing unit on: Turn the dispensing unit on:
1. Allow the distiller to operate for an additional 5-6 hours. Several gallons of
water will be in the storage tank.
2. Turn the Cooler Power switch to ON.
3. Turn the Dispenser Hot Water Switch to ON. (Three temperature unit only.)
Cleaning the Boiling Chamber Cleaning the Boiling Chamber
Cleaning the Boiling Chamber Cleaning the Boiling Chamber
Cleaning the Boiling Chamber
Every 2000 hours or every three months: Every 2000 hours or every three months:
Every 2000 hours or every three months: Every 2000 hours or every three months: Every 2000 hours or every three months:
Step 1 Step 1
Step 1 Step 1 Step 1 Shutdown and Cooling:
Shutdown and Cooling:
Shutdown and Cooling: Shutdown and Cooling: Shutdown and Cooling:
1. Turn the distiller switch to the OFF
position and unplug unit.
2. Allow the boiling chamber to cool down.
3. Turn the unit so that the rear is acces-
sible.
4. Remove 4 screws and take off rear
access panel.
5. Disconnect the tubing to the boiling
chamber.
6. Disconnect the electrical connections to
the boiling chamber.
7. Pull the boiling chamber out of the unit.
8. Drain into a sink.
9. Fill the boiling chamber with water to the top of the scale line.
10. Add 4-6 tablespoons of Lumen™ descaling powder to the boiling chamber.
11. Allow the lumen to soften any scale (allow 12-24 hours for scale to soften).
12. Drain and rinse boiling chamber.
13. Reconnect tubing and electrical connections.
14. Turn the distiller switch to the ON position.
Tubing Connections
Electrical Connection