2
© Pure Water Systems Australia. V1 - PWS00031
A
B
C
1-2
3-4
1. Place the unit on a firm surface.
2.
(A)
Insert the opening tool
(B)
Turn the collar of the unit in an
anticlockwise direction
(C)
Lift the housing from the base of the unit.
3. Carefully unwrap the new filter cartridge. Try to only handle the cartridge
by the plastic end caps.
4. Firmly press down on the rubber seals all the way around on both ends of
the filter cartridge to ensure they are seated correctly.
5. Place the cartridge into the base of the unit.
Note: The end of the cartridge with the white writing should be
placed into the base of the system
.
6. Replace the housing
(C)
over the cartridge and onto the base and secure
the collar with the opening tool, tightening it in a clockwise direction.
INSTALLING YOUR BENCH TOP WATER FILTER
AND CARTRIDGE
TA
NK WATE
R
TO
W N WATE
R
C
H
ILLE
D WA
TE
R
STEP 1. FITTING THE CARTRIDGE
STEP 2. FITTING THE TAP ADAPTOR
The style of tap you have will determine which of the 3 tap adaptors
supplied will be required to attach the diverter to your faucet.
1. The diverter needs to be fitted to the bottom of your kitchen tap. Remove
the aerator to find out if you have an
internal
,
external
or
no thread
on
your tap.
Continued on the following page.
For an easy to follow video on how to install your
Bench Top Water Filter
and
Doulton Ultracarb Ceramic Cartridge
for
tank water
use, please scan here.
Please refer to the previous page for installation of the
Hi-Tech Optimiser
Cartridge
for
town water
use.