SECTION PAGE
INDEX
SAFE USAGE OF THE PROJECTOR
3
INSTALLING THE PROJECTOR
4
FITTING THE LAMP
4
POWER SUPPLY – MAINS
5
OPERATION
5
STAND-ALONE MODE
5
XLR CONNECTORS AND TERMINATOR
5
MASTER/SLAVE SYNCHRO MODE
6
CONTROLLER MODE – DMX 512 OPERATION
7
REMOTE CONTROLER MODE
9
MAINTENANCE
9
KEEPING THE PROJECTOR CLEAN
9
TROUBLE SHOOTING
10
TECHNICAL DATA
10
ELECTRICAL DIAGRAM
11
Please note that as part of our ongoing commitment to continuous product development, specifications are subject to change
without notice. Whilst every care is taken in the preparation of this manual we reserve the right to change specifications in the
course of product improvement. The publishers cannot be held responsible for the accuracy of the information herein, or any
consequence arising from them.
Every apparatus is tested completely and packed properly by the manufacturer. Please make sure the packing and / or the
apparatus is in good condition before your installation and use. Should there be any damage caused by transportation, consult
your dealer and do not use the apparatus. But any damage caused by improper use will not be assumed by the manufacturer
and / or dealer.
THESE ITEMS ARE PACKED TOGETHER WITH THE PROJECTOR
ACCESSORIES
Inner Bracket (1 PCS)
Outer Bracket (1 PCS)
M8 knobs for bracket (2 PCS)
Power-cord (1 PCS)
XLR plug (1 PCS)
XLR socket (1 PCS)
This manual (1 PCS)
Remote Controller (Optional)
INTRODUCTION
Thank you for purchasing our product PANDA II PR-2100B.
This product manual contains important information about the safe installation and use of this projector.
Please read and follow these instructions carefully and keep this manual in a safe place for future
reference.
PANDA II adopts advanced procedure of design and manufacturing and uses international protocal
DMX 512 and compiles to CE norms. The figure of housing is elegant, lovable and portable, which
features its special character compared with conventional luminaire. PANDA II can be suspended from
the ceiling or be seated on the floor with the inner and outer brackets provided and the angle of the
body is easy to be adjusted, and the projector even can be carried by hand.
The programmes having been set in the PANDA II may be actived by sound or controller. The PANDA
II can be used as a stand-alone unit or linked with each other for multi-units or linked to a controller, so
it is suitable for many different applications. PANDA II uses an OSRAM ERF 15V/150W lamp with
adjustable lamp brightness via controller and uses 14 gobos and 14 colourful glass filters, so the
producing light beam is bright and sharp.
PANDA II will switch off the lamp automatically after 8 seconds of shutter, so it can effectively prolong
the life of the lamp. The gobo/colour wheel rotating quickly can produce rainbow or strobe effect. In
addition, you may use remote controller with a long distance to control the luminairs for shutter, strobe
and fast/slow action to audio.
2/12
panda II manual.doc
