PURE n NATURAL SYSTEMS - www.purennatural.com - 1-800-237-9199
Leave a space no less than 15 cm (5.9”) between the wall and
dispenser.
Keep the unit away from sunlight, heat & wetness.
Be sure to use single outlet socket with correct power voltage.
Plug the power cord direct into the electrical outlet.
1.
Locate the nearest cold
water source. It’s usually located near
or under a sink.
2.
Install an Angle Valve Adapter; 1 end onto the cold water line
and the other end to the kitchen faucet line. The ¼” water
cooler tube line will be connected to the Angle Valve Adapter
by quick connec
t to the ¼” insert.
3.
Run poly-tubing from the water source to the water cooler.
(For example; cut a small hole in the back of the cabinet and
“snake” the waterway inside the wall to the ceiling. Once
above a drop ceiling, it’s easy to run it to the cooler
location.)
4.
Plug the cooler in - - refer to the
5.
FILL THE WATER TANKS BEFORE THE HOT SWTICH IT TURNED
ON
.
Installation Re-Cap
Safety Reminders
