10
Step 2
Attach Slide Chute to Ladder Assembly
Locate Slide Chute (J) and completed Ladder/Base Assembly.
Thread the top of the Handrail Tubes through the holes located in the top of the Slide Chute.
Locate 2x 35mm Bolts (B), 2x Washers (D), 2x Spring Washers (E), and 2x Dome nuts (F).
Secure the slide chute to the handrail using the above hardware.
Step 3
Assemble Tie Bar
Locate the Tie Bars (K, G)
Secure the Tie Bars together using 1x 25mm Bolt (C), 1x Washer (D), 1x Spring Washer (E), and 1x
Dome Nut (F).
Attach the end of Tie Bar (G) to the Ladder Stabilzer Bar using 1x 35mm Bolt (B), 1x Washer (D), 1x
Spring Washer (E), and 1x Dome Nut (F).
