ASSEMBLY INSTRUCTIONS
STEP
STEP 5
Warning: The anchors must be placed under the ground and secured with concrete in order to
reduce tipping hazards
YL2
x4
YD10
x4
YE12
x4
YD2
x4
YG13
x4
P/DB
x1
Remove bolt
Slide the net over
pole Replace bolt
We recommend setting this playground set in
concrete for safety and security purposes.
Locate and mark the position for the legs.
Check the dimensions shown on diagram on
page 9. Dig square holes of 14x14x14 inches
deep and wide and fill with quick set concrete.
(Not Included) The top of the concrete
should not exceed ground level.
While concrete is wet. Insert the Hook end of
the supplied (D2) Leg Bracket into the
concrete. Make sure it is positioned properly
with just the hole about 2 inches above the
surface to bolt to playset before drying.
Allow concrete to dry for 24 hours before
attaching the leg bracket to the frame poles.
12
GQBrands.com
1-866-498-5269
