11
MODEL# 8514IT
ASSEMBLY INSTRUCTIONS
STEP 4
:
Locate:
1x Body Height Adjustment Tube (7)
1x Adjustable Leg Hold Tube (9)
1x Lock Nut M6 (21)
1x Short Plug (18)
1x Hexagonal Bolt M6*42 (32)
1x Washer M6 (33)
1x Square Inner Cap (46)
Insert the Adjustable Leg Hold Tube from
the top, in the opening nearest to the plug
of the Body Height Adjustment Tube. Make
sure Spring & Zip Tie reach the other side.
Pull the plastic Zip Tie to expand spring
until the metal ring is aligned with the hole.
Grab the Hexagonal Bolt M6*42 (Part 32)
and insert through the opening of the
Spring inside.
NOTE:
The Bolt must go through both openings
and the hook of the Spring.
Secure the Bolt in place with a Washer M6
(Part 33) & Lock Nut M6 (Part 21)
NOTE:
If the Short Plug (Part 18) is not already
attached to the Adjustment Tube, please
locate it and attach.
Pull on the Short Plug to insert trough an
opening.
Remove the Zip Tie by using a household
knife or scissor.
Close the opening by pushing the Square
Inner Cap (Part 46) all the way until all the
ridges are inside.
