Usage and Maintenance Instructions
Ver. 1 09/2013 (2691)
3
HEALTH CAUTION
•
If you have any concerns regarding your health, consult your doctor before using this
product.
•
Discontinue use if you feel discomfort, or if any pain or irritation results, do not use if your
feet are swollen or inflamed or if your feet have any skin eruptions. In this case please consult
your doctor or a medical professional first.
•
The appliance has a hot surface. Persons insensitive to heat must be careful when using the
appliance.
TO STORE
•
When not in use, unplug the unit. Allow the appliance to cool and store out of reach of
children in a safe, dry location.
•
Never wrap the cord around the appliance as this may cause the cord to wear prematurely
and break.
•
Handle the cord carefully for long life, and avoid jerking, twisting or straining especially at
plug connections.
INSTRUCTIONS FOR USE
1.
The appliance must always be operated with water.
2.
Check that the rotary switch is in OFF or “0” position before you connect the appliance to the
mains.
3.
Do not connect or disconnect the appliance to/from the mains while your feet are in the
water or if your hands are wet.
4.
Place the appliance on a flat and suitable surface and the non-skid rubber feet will prevent it
from slipping.
5.
Fill the appliance with water (can be cold or at desired temperature).
6.
Do not fill water over the “MAX” water-level line marked on the unit. This unit is designed to
maintain the water temperature at a comfortable level and can also be used for raising the
temperature.
7.
Seat yourself comfortably, place feet on the foot rests and select your desired setting, as
below:
7.1
IHEAT:
Turn the rotary switch to
1
(Fig. 5).
This function will give you a unique vibration massage with a stimulatory bubble bath
in heated water. The infrared source can have a stimulating effect to the blood
circulation.
7.2
HEAT + BLOWING:
Turn the rotary switch to
2
(Fig. 4).
This function will give you a comfortable and relaxing foot bath in heated water. The
unique diffuser can provide a stimulation of the blood circulation and can be used as a
nail dryer.
7.3
M INFRARED:
Turn the rotary switch to
3
(Fig. 3).
This function will give you a unique vibration massage. The infrared source can have a
stimulating effect to the blood circulation.
8.
When you have finished your foot spa treatment, make sure you turn the rotary switch to the
“OFF” or “0” position, then unplug the unit.
9.
To empty, tilt the unit over a sink or bath to enable the water to flow out. Rinse out and dry
the unit. Never immerse entire unit in water or any other liquid.
