5
1. Lift the top cover and rock
salt bowl to install one of the 3
light bulbs packed in the tank.
Setting Up PureGlow Crystal
2. Plug the bulb pins into the small
holes on the bulb base. Then
replace the rock salt bowl.
3. Neatly arrange the salt rocks
in the rock salt bowl and
replace the cover.
NOTE:
You
may have extra salt rocks. It is
not necessary to use them all.
DO NOT overfill the container.
4. When installing the diffuser tank,
be sure to align the grey dot on the
side of the tank with the gray dot
on the base (as shown to the left).
NOTE:
The product will only work
when properly connected.
NOTE:
Only use 10W light bulbs with this product. Standard 15W bulbs
should not
be used. To order replacement 10W light bulbs, please visit
pureenrichment.com.
