Real Time Clock Setting
7
8
Set the year
④
Set the month
.
⑤
Set the date
⑥
9
10
Press and release the
S BUTTON
to advance
one year until the correct year appears.
After the year is set, press
BUTTON
, the Month
figure will appear
.
Press and release the
S BUTTON
to advance
one month until the correct month appears.
After the month is set, press
BUTTON
, the Date
figure is flashing automatically
.
Press and release the
S BUTTON
to advance
one day until the correct month appears.
After the day is set, press
BUTTON
to exit the
setting mode.
Body Temperature
Illustration For Use
Illustration For Use
Note:
Oils or cosmetics on the forehead may give a lower temperature
reading than the actual one.
●
Remove dirt from the forehead before
taking a measurement. Wait at least 10 minutes after washing the
forehead area before taking a reading.
Check before each use that the lens is intact. If it is damaged,
contact your retailer or the service address.
Bear in mind that the thermometer needs to have been in the room
in which the measurement is taken for at least 30 minutes before
use.
U
Before each measurement, make sure that the device is in the
appropriate mode for the measurement that you wish to take
.
●
●
●
sers and the thermometer should be in the same ambient
temperature.
●
Before measurement:
To measure forehead temperature:
Figure 1
1. Install the forehead cap.
2. Press the
BUTTON
to switch on the thermometer and the
display is activated to show all segments.
3.
4. Place the probe with the forehead cap fitted on the temple
.
5. Press the
START BUTTON
to start measurement
.
6. Move the thermometer smoothly over the forehead to the other
temple and back
.
7. The measured value appears on the display and the end of the
measuring is signalled by a short beep
.
8. The thermometer will shut off automatically after 60 seconds
of inactivity. To prolong battery life, press the
BUTTON
to
turn the unit off.
After self-checking, Figure 1 appears on the display screen with
beeps, so you can start a new measurement.
How to switch between ear and forehead mode:
●
When the device is on, Press and hold the
S BUTTON
to switch
between ear mode and forehead mode.
●
●
Remove hat and hair and wait 10 minutes before taking a reading.
Do not use the thermometer on a perspiring or sweating forehead,
as this may affect the reading.
The temperature of a healthy person is affected by various factors:
the person’s individual metabolism, their age(body temperature is
higher in babies and toddlers and decreases with age. Greater
temperature fluctuations occur faster and more often in children,
e.g. due to growth spurts), their clothing, the ambient temperature,
the time of day(body temperature is lower in the morning and
increases throughout the day towards evening), the preceding
physical and, to a lesser extent, mental activity.
It is suggested that users develop the habit of daily measurement,
and use this product to establish a private normal temperature
range for themselves and their families as a reference for
measurement.
