Before using your new Speaker Box with Amplifier, please
read this instruction manual to prevent any damage. Put it
away in a safe place for future references.
INSTRUCTIONS
Before connecting the speaker, make sure the system is off and
the controls on the minimum level. On the contrary the system
Could damage
1.- Plug the polarized cable to electric power and to the speaker
2.- Plug the Microphone on the
“
MIC
”
input with a 6.3 connector
3.- Plug an auxiliary system (CD, DECK, MP3, DVD, etc) on
“
LINE IN
”
input
4.- Turn on the systems. A green LED light up on the speaker to
indicate it is on
5.- Set the volume on the middle level on the MIC and LINE IN input
6.- Increase little by little the line level volume
7.- Set TREBLE and BASS controls to equalize the sound.
8.- A red LED light up when the system detects overload power.
You must decrease the volume.
Caution
Do not close the microphone to the speaker, it can cause
feedback echo and it damage the system
