13
If your fan is not working properly, please check the following table before sending it to a service agent:
SIMPLE TROUBLESHOOTING
Problems
Possible Reasons
Solution (s)
The fan doesn’t work when it’s
started.
1.
The power cord plug is not
connected properly and electric
power is off.
2.
The switch is off.
1.Whether the plug is inserted into the
socket or connected well.
2. Wheteher switch is “ON”
The fan doesn’t swing
but has wind.
SWING button is off
Whether the Oscillate switch is “ON”
Humidifier indicator light not
working. No wind, No mist
1. Plug not inserted properly
2. Power switch is turned off
1. Insert the plug properly
2. Switch power “ON”
Himidifier indicator light
illuminate
Having wind
No mist
1. No water in the water tank
2. Auto temperature knob isn’t
open
3. Tank cover is not well placed
1. Fill the tank with water
2. Open auto temperature knob by
clockwise
3. Press float cover well
The mist is smelly
1. New product
2. Whether the water tank
or water is cleaned
1. Open the water tank for 12 hours in
the cool place
2. Clean the water tank and change
the water
Humidifier indicator light
illuminate
No wind, No mist
Too much water in the tank
Decrease some water and tighten the
cover
The amount of mist is very
small
1. Transducer is clogged with dirt
2. Dirty water or water has been
too long in the water tank
1. Clean the transducer
2. Add clean water
Evident vibration
1. The rear guard is not installed in
a stable fashion.
2. The blade cap is loose.
3. The blade is damaged.
4. The blade is off balance.
1. Install the rear guard tightly.
2. Tighten the blade cap.
3. Replace the fan blade.
4. Turn the fan blade and reinstall it.
Other unusual problems
1. Smoke appears from the motor
or there is a smell of burning.
2. The metal parts exposed to
electricity or the fan insulation is
damaged.
3. The rear cover of the motor is
damaged.
1.2.3.
Stop using the appliance and
send it to a service agent for repair.
EN
