11
being careful to align with the corresponding holes.
Gently turn the fan upside down. Fix the
base and main body together using the
2 screws supplied.
To reduce movement of the power cord
during use or transportation, place the
power cord through the cut out on the
bottom of the base.
REMOTE CONTROL
Figure 1
Figure 2
Figure 3
1. Pull the cover in rearward direction and open it (figure 1)
2. Insert the batteries (AAA). (figure 2)
3. Close the battery cover. (figure 3)
NOTE: Follow the battery polarity markings moulded into the battery compartment to
ensure that they are inserted correctly.
The batteries contain materials, which are hazardous to the environment; they must be
removed from the appliance before it is scrapped, dispose of the batteries responsibly.
12
OPERATING INSTRUCTIONS
The fan can be controlled by pushing the buttons, which be setting on control panel or
remote controller.
ON/OFF Press the button once to turn your Fan ON, press the button again to turn
your Fan OFF.
Fan Speed Use the speed control buttons to increase or decrease
the speed.
The Speed Setting is displayed in the LCD screen
Oscillation Press the OSC button to make the fan swing. Press the button again to
switch this function off. The symbol is displayed in the LCD screen.
Mode Press the MODE button to select the SLEEP or BREEZE modes. In SLEEP
mode the LCD displays and in BREEZE mode it displays . Press the button a
third time to turn the mode off.
NOTE: when mode of breeze wind or sleep wind is selected, the fan will continually
cycle through Low, Medium, and High setting.
TIMER Press the TIMER button to set the time before your Fan switches OFF fan. The
Timer can be set from I hour to 12 hours. Press the button once, the timer will be set 1
hour, press the button twice, the operating time is 2 hours, press it three times, the