6
OPERATION
EN
CLEANING AND MAINTENANCE
CLEANING
1. Ensure the unit is power-off and unplugged.
2. Use a soft cloth to clean away any dust or debris from the surface of the unit and air inlet.
3. Pull out the water tank and slide out the cover to clean the water tank.
Clean the water basin with soft cloth and the vinegar if there is dirty in it.
Rinse the water basin with clean water and let dry.
Store the device in a dry, dust-free place out of direct sunlight.
This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue
improving and developing its technology
DISCARDING WORN HOUSEHOLD DEVICES
The European directive 2012/19/EC pertaining to electrical and electronic waste prohibits such household goods
from being discarded with local refuse services. Worn devices must be collected separately to optimize the recovery
and recycling rates of the components therein to reduce detrimental effects on the environment and on human
health.
WARRANTY
All the warranty terms finish 24 months after the buying date. It is absolutely necessary to show your buying invoice to be
covered by the warranty terms. The warranty covers any defect produced during the manufacturing or caused by the raw
material used in this product, and only in the event that the customer has followed the instructions and maintenance showed
in the user’s manual, and only in the event that the installer has followed the installation directions. This warranty does not
cover any damage caused by accidents or negligence. The warranty only covers the customer in case that any reparation
has been done in our authorised repairing shops. The warranty DOES NOT COVER any damage or injury caused to people,
animals or things caused by an accident or the negligent use of this product. The warranty will be suspended in case of any
manipulation of unauthorised people or in case of non-original parts or components.
Connect the power cable to both the product and the wall socket. The screen will flash and the dehumidifier
will make a beeping sound.
1. Press the button to start. The device will automatically go to a constant mode “CO” and after 3 seconds
the screen will display the current humidity in the room.
2. Press the
button continuously to set a desired humidifity. The green light will turn on to indicate that a
desired humidifty has been set.
Attention: Each time the humidity button is passed, the desired humidity level will increase by 5%. For example,
if the humidity is set to 50%, the dehumidifier will only work in environments where the humidity is above
50%. Once the humidity reaches 50%,the dehumidifier will turn off.
The humidity can be set between 35% to 80% or left on continuous “CO” mode where it will remain on
regardless of the humidity.
3. Pressing the
se button will display “L” on the screen for quieter operation. Press again to return to normal
operation “H”. Silent mode will reduce water collection by approximately 50%.
4. Press the
button again to turn off.
FULL WATER TANK
When the tank is full, the red indicator light will keep flashing, and the unit will stop dehumidifying. Turn off
the dehumidifier before taking out the water tank, pull off the rubber plug from the displacement hole, empty
the water, then slot the tank back in carefully.
