INSTALLATION
INSTRUCTIONS
P
A
GE
1
P
A
G
E
1
Original doggydocks
®
Jumbo doggydocks
®
Installing Stabilizer Bars:
Fold the doggydocks until the
middle hinge is visible.
Place the
round dowel in
the fold of the second hinge.
Straighten out the doggydocks
and center stabilizer bars with
hinge. Press firmly to make sure
board is locked.
3/8”
Folding doggydocks
®
doggydocks® Models
Screw Eye Hook
to side of board
Adjust length of rope
for proper float angle.
Floatation Buoys
For Jumbo doggydocks
®
Stabilizer Bars
(For Folding Model
and Extension Kit)
Installation Steps
1. Install Mounting Kit on Dock, Boat or Swim Platform.
2.
Place Snapbag on Underside of doggydocks.
(See Instructions Page 2)
Place Dowel and stabilizers bars on folding models.
3. Attach Extension Kit using Stabilizer Bars and Supplied Screws.
4. Install Eye Screws to Side of the doggydocks Board.
5.
Use stabilizer bars to join
doggydocks and
extension piece. Install
screws in pre-drilled
holes.
®
doggydocks®
Extension
See page 3 for proper
attachment
Snapbag™
for All Models
3/8” Dowel for
Folding Model-Place
Inside Second Hinge
NOTE:
Stabilizer Bars Do Not Float!
We recommend securing
with a strap when in use.
