Proper Support:
The
hinge is designed to
allow it to move up or down. It is not
designed to carry weight. Place
doggydocks so hinge is directly over
edge of dock as illustrated.
doggydocks
®
Note:
The hinge must be supported during use. Misuse will void warranty.
Swivel Cleat Installation
Instructions
Diagram 1.
Securing doggydocks®
1. Place the swivel cleat in the closed position.
2. Set doggydocks cleat cut out over swivel cleat.
3. Loosen wing nut and swivel the top part turn 180
degrees.
P
A
GE
3
P
A
G
E
3
IMPORTANT:
Note:
Before installing the mounting assembly base, make
certain that the ¼” x 2.5” bolt and lock washer is seated
properly or the thumbscrew will not tighten properly.
Depending on the type of surface installing on it may be
necessary to use different bolts types.
Quick Release Mounting Kit Instructions
Installing Hardware
1.
2.
3.
4.
5.
doggydocks™
of mounting surface.
Drill (2) holes into the doggydocks® as shown in diagram 2
Mark platform through the
holes.
Drill ¼” holes in mounting surface.
Screw insert flush into dock or platform.
Line up
with the edge
drilled
Line up holes.
7.
Diagram 2.
Diagram 3.
