Punktal PK-337, Manual

Page: 15 / 20

15.
• Make sure blender is unplugged. Place blender base on
clean, dry surface from being pulled up into motor during
operation.
• Make sure small gasket is in place on outer rim of blade
assembly. The jar base firmly. The large gasket should be
in place on jar bottom, underneath the wide collar.
• The blade assembly must be screwed into the jar firmly.
If not, it may loosen when the motor is turned on.
• Set jar into place on blender base, making sure it is se
-
curely seated. If not gently rock the jar seated.
• Plug cord into outlet.
• Put ingredients in jar. Place hand on jar.
• Process food or beverages. Place hand on lid when
blending liquids. Push button on control panel to start
blender.
• Always turn blender OFF and wait until blades have sto
-
pped rotating before removing jar.
• The use of coffee mills hand down when the cup, To
prevent the prolapse
• To remove jar after blending complete, lift the jar straight
up. If it is not easily removed, gently rock and lift. Do not
twist.
• Never place jar onto unit while motor is running.
SPEED
Speeds are 1, 2, and Pulse
Pulse is a controlled cycle operation. This means it operates only
while the button is held down. All other speeds are continuous cycle
operate continuously at whatever speed is selected until turn the
knob counter-clock wise to the 0 position.
For Continuous Operation
Rest one hand on top the blender jar with lid securely in place.
Rotate knob clock wise to desired speed setting to turn blender on.
For Controlled Cycle Operation
Rest one hand on top of blender jar with lid securely in place.
Press “pulse” button and hold down for about 2 seconds. Release