8
CONNECT AND OPERATE
Before you begin to install the PA66AMP/KIT, it is important to implement good installa-
tion practices:
1. Make sure that AC power is disconnected before making ANY connections
to the main unit and attached devices.
2. Install in a well-ventilated environment
3. Ensure any vents are not blocked to allow for proper circulation
4. Do not install above or below sources of heat
5. Use good quality cabling
6. The unit can be installed within a rack using the provided mounting rack
ears
Up to 6 sources can be connected to a single PA66AMP/KIT. Using RCA
cables connect each source into one of the available Source Inputs.
Some sources such as MP3 players and Cell Phones may require a 3.5mm
Stereo to RCA Cables in order to connect to the PA66AMP/KIT.
NOTE: Input 1 can be used as a global input for all zones when a source
is connected to Input 1 and the 12VDC is applied to the PA-IN jack (tip is
positive) then source 1 will broadcast to all zones. If no 12VDC is applied, then
the first input will be operating under normal conditions.
CONNECTING THE SOURCES