
DO NOT
DO NOT
DO NOT
DO NOT …
…
…
…
1.
Prevent airflow to your amp; ventilation is required front and rear
2.
‘Daisy chain’ speakers. Run a maximum of 1x4Ω speaker or 2x8Ω speaker per amplifier
channel.
3.
Run amplifiers with the clip or limit lights on constantly
4.
Send a clipped or overdriven signal from your mixer or source to the amp
5.
Store your amp or speakers in a damp environment
6.
Overload mains sockets; Never run more than 3000W of amplifiers, lights or other
electronic equipment from one mains outlet socket.
7.
Connect 2 amp channels, or 2 different amps to one speaker
8.
Short circuit or cross-connect an amps inputs or outputs
9.
The front panel has both SIGNAL and CLIP LED indicators
The front panel has both SIGNAL and CLIP LED indicators
The front panel has both SIGNAL and CLIP LED indicators
The front panel has both SIGNAL and CLIP LED indicators –––– if the CLIP LED’s illuminate
if the CLIP LED’s illuminate
if the CLIP LED’s illuminate
if the CLIP LED’s illuminate
reduce the input signal to the amplifier immediately. A clipped signal
reduce the input signal to the amplifier immediately. A clipped signal
reduce the input signal to the amplifier immediately. A clipped signal
reduce the input signal to the amplifier immediately. A clipped signal within the audio signal
within the audio signal
within the audio signal
within the audio signal
chain can damage both speakers and amplifiers.
chain can damage both speakers and amplifiers.
chain can damage both speakers and amplifiers.
chain can damage both speakers and amplifiers.
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY
TO PERSONS
TO PERSONS
TO PERSONS
TO PERSONS
WARNING - Using electric product, basic precautions should always be followed, including the
following:
1. Read all the SAFETY INSTRUCTIONS before using the product.
2. To reduce the risk of injury, close supervision is necessary when the product is used near children.
3. Do not use this product near water -for example, near a bathtub, washbowl, kitchen sink, in a wet
basement or near a swimming pool or the like.
4. This product is capable of producing sound levels that could cause permanent hearing loss. DO
NOT operate for a long period of time at high volume or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should consult an audiologist.
5. This product should be located so that its location or position does not interfere with its proper
ventilation.
6. This product should be located away from heat sources such as radiators, heat registers or other
products that produce heat.
7. The product should be connected to a power supply only of the type described on the operating
instructions or as marked on the product. Always ensure that a good quality mains lead is used
applicable for your country. The following wiring convention is used in all product mains leads, and
must be strictly observed: Green & Yellow = Earth. Brown = Live. Blue = Neutral. IMPORTANT: THIS
UNIT MUST BE EARTHED!