3
INSTALLATION
OPERATION
1
Safety suspension attachment
2
Mounting
3
Mains input connection
4
Rotation ON/OFF switch
5
Cooling fan
CLEANING & MAINTENANCE
•
Disconnect from the mains before starting the maintenance operation.
•
Frequent cleaning is recommended. Use a soft lint-free moistened cloth.
•
Do not use any chemicals, abrasives or solvents that could damage the device.
•
There are no user-serviceable parts in this product. Refer all servicing to qualified
personnel.
•
Connect the mains lead and turn on the power and the LED will illuminate.
•
To start the rotation of the projected image press the red switch to the ON position.
•
To change the GOBO filter disc unscrew the two thumb screws on the bottom of
the lamp assembly and extract the holder.
•
Extract the wire circlip from the front recess and press out the filter disc.
•
Replace the filter disc and circlip then refit the holder and tighten the thumb
screws.
•
To focus the projection turn the outer knurled wheel around the lens until the
projected image is in focus.
•
Secure the luminaire using the attached mounting bracket and adjust the
projection angle by loosening the thumb wheels and rotating the lamp assembly
then re-tighten the thumb wheels.
