Pulse DuMV@PCI, User Manual

Page: 16 / 61

-12-
*Call Num ：
1.may enter the whole number, e.g. 0911111111
2.a simple *”means 2-stages-dialing. The call will be answered and
prompt dial tone again to receive the called number as the
destination, e.g. 0911111111 or 0911111111#
3.#['d'n]['a'ppp] for one-stage dialing
[...] is option
'd'n means to delete the beginning n codes,
'a'ppp means to add 'ppp' in front.
for example #d2a09 means one-stage dialing,
delete the first 2 codes from your destination number,
then add 09 in front as the new destination number.
Example:
Lan to Mobile: *, #
(1)DuMV@PCI and Lan Phone both need to register proxy server or Asterisk.
(2)Proxy server/asterisk set the route that the prefix of destination number
(3)When you dial any destination phone number from lan phone, DuMV@PCI will
connect this call auto.
Example of Application:
When you call the ch.1 DuMV@PCI gsm number,it will provide dial tone and you
enter a destination number.
Then ch.2 DuMV@PCI will dial this number and connect.
ch.1 DuMV@PCI: mobile to lan set route table *,*
ch.2 DuMV@PCI:lan to mobile set route table *,#
Additionally, two channels DuMV@PCI both need to register proxy server or
Asterisk.
And proxy server/asterisk set the route that the prefix of destination number dial out
from ch.2 DuMV@PCI.
*The channel 2 DuMV@PCI 's ip: the first ip + :5062 (e.g http://192.168.0.100:5062)