8)
Channel A speaker output via Binding Posts. Minimum speaker impedance 4Ω. As with
all speaker wiring care must be taken to ensure no wires can present a short cirtcuit to
the amplifier.
Speaker wires carry high voltages, care should be taken to ensure
no bare wires can be touched as this may result in electric shock.
9)
Mode selection switch – this selects either BRIDGE MONO, PARALLEL MONO or
STEREO operation.
In BRIDGE MONO
BRIDGE MONO
BRIDGE MONO
BRIDGE MONO the amplifier works as one signal channel ideal for driving higher power
speakers. This must be used in conjunction with the BRIDGE MONO speaker output, only
one signal input is required (into Channel A), this must be mirrored on the front panel
controls – turn Channel B to the lowest setting and only use Channel A to control the
amplifier. The wiring for BRIDGE MONO utilises both of the RED BINDING POSTS with
Channel A used for Sve and Channel B used for Speaker –ve. Minimum
impedance for this mode is 8Ω - operation below this will result in damage to apparatus.
In PARALLEL MONO
PARALLEL MONO
PARALLEL MONO
PARALLEL MONO mode the amplifier will operate as two independent channels – both
Channel A and Channel B gains independent of each other. The PARALLEL mode enables
only one channel input to be used, this will be replicated across both channels.
In STEREO
STEREO
STEREO
STEREO mode the amplifier will operate as two independent channels – both Channel A
and Channel B
10)
Balanced XLR for signal level (0.775mV) input
11)
Air ventilation slots – DO NOT BLOCK.
12)
Air ventilation slots – DO NOT BLOCK.
13)
Balanced 6.35mm (1/4”) Jack for signal level (0.775mV) input. This input may also be
used for unbalanced signals.
Compliance
Compliance
Compliance
Compliance
This equipment is designed to comply with the following standards:
BS EN55103-1:1996 BS EN55103-2:1997 BS EN60065:2002
When this product reaches the end of its life, do not dispose with household waste. See www.recycle-
more.co.uk for details of how to dispose of PULSE products in an environmentally sound fashion, or
contact PULSE directly via www.pulse-audio.co.uk
