www.pulse-audio.co.uk
| APS PA Series User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing the Pulse APS series portable PA unit. This versatile portable PA unit is packed with features in a compact,
manageable enclosure and is suitable for a wide array of applications ranging from public address for presentations to outdoor karaoke.
Package Contents
Please check the contents to ensure that the product has been received in good condition.
If you find any accessory is missing or the product has arrived with any problems, please contact your retailer at once.
APS portable PA unit
Mains power lead
2 x VHF handheld microphones
IR Remote control for media player
This product contains no user-serviceable parts so make no attempt to try to fix or modify this item yourself as this will invalidate the
warranty. We recommend you keep the original package and proof of purchase for any possible replacement or returned demand.
Warning
To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture. To prevent electric shock do not remove the
cover. No user serviceable parts inside. Refer servicing to qualified service personnel.
Safety
Prior to connecting mains, check the supply voltage is correct and the mains lead is OK.
Avoid ingress of water or particles into the enclosure.
If the mains or D.C. fuse blows, refer the unit to qualified service personnel
If the VHF microphones are to be unused for a long period of time, remove the batteries and store for later use.
Placement
Keep the unit out of direct sunlight and away from heat sources.
Place the unit in an upright position during use and storage.
Keep the unit away from moisture or dusty environments.
Cleaning
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls.
To avoid damage, do not use solvents to clean this equipment.
Powering up
Your new APS portable PA unit may arrive with you with the internal battery charged. Before connecting to the mains, switch the unit on
and see if the power LED lights. If not, you will need to charge the battery before using away from a mains supply.
When not in use but connected to the mains, if the POWER switch is in the OFF position, the internal battery will be re-charged from the
mains supply. This can be observed by the CHARGE LED which lights when charging. Connect the PA unit to the mains using the
appropriate mains IEC lead supplied. You may otherwise opt to connect the DC input at the rear to an external 12Vdc supply (e.g car
battery) or use the internal battery if charged.
Turn the VOLUME controls down (anti-clockwise) and turn the POWER switch on (the power LED should light). BASS and TREBLE controls
should remain pointing vertically (12-o-clock position). Turn up the VOLUME control part way .
