4
with a fused 13A-IEC cord. Should the fuse require replacement please ensure a fuse is
fitted of the same value as originally supplied.
5)
Power Switch
On/Off control for the system.
6)
Speaker Output
The system utilises one passive and one active (powered) speaker. Supplied with Phoenix
type connections to allow the wiring to be produced at ground level and then simply
plugged into the speakers. Care should be taken to observe the polarity ensuring the red
wire is connected to the Positive (+ve) terminal and the Black wire connected to the
Negative (-ve). If the cable supplied with the system is too short for the install we
recommend replacing this with a good quality speaker cable of at least 1.0mm
2
diameter.
7)
Power Indicator
This will illuminate green when the system is switched on and is running on the correct
mains supply. Should this light fail to illuminate this should indicate an issue with either the
system or the mains supply.
8)
Signal Indicator (Right)
The signal indicators illuminate and flash green to show the presence of an input signal.
9)
Signal Indicator (Left)
The signal indicators illuminate and flash green to show the presence of an input signal.
10)
Balanced Line Input (Right)
To permit use with long signal cable runs the ACTIVEPRO Series have been fitted with
Balanced Line Inputs. The speakers will accept a standard 775mV signal. If used in Mono
(parallel) mode the right input is not used.
11)
Mode Switch
The ACTIVEPRO series can be used with either a stereo or mono signal. With the switch
pressed the speakers work in mono mode and only require a signal on the left input.
12)
Balanced Line Input (Left)
To permit use with long signal cable runs the ACTIVEPRO Series have been fitted with
Balanced Line Inputs. The speakers will accept a standard 775mV signal. If used in Mono
(parallel) mode only the left input is not used.
13)
3.5mm Line Input
Accepts standard stereo (or mono) line inputs – ideal for use with laptops or MP3 players.
14)
Phono Line Input
Accepts standard stereo (or mono) line inputs – ideal for use with CD/DVD players, satellite
or terrestrial TV tuners or other line level sources. If using the speakers in MONO mode
only the left channel input is required.
Unbalanced L-R Line Input
