Page
12
of
13
V1.0
Firmware Update
The Load Runner can install new firmware via the USB interface from flash drive. It is recommended to use a
flash drive with only the firmware file on it to reduce the chance of error.
There must however be only 1
firmware file on the flash drive otherwise the incorrect file may be loaded.
Update Process:
DO NOT
remove the flash drive during the firmware update process.
1)
Ensure only one *.bin file on the flash drive as the module will select first *.bin file it finds.
2)
Power down the module.
3)
Insert the flash drive with firmware on it.
4)
Power up the module whilst holding the mode button ON.
5)
You should see the latch button illuminated indicating it is in update mode. You can now release the
mode button.
6)
The record button may be illuminated which indicates the flash drive is in the process of connecting.
7)
The envelope button will be illuminated whilst the firmware update is in progress.
8)
When the update has completed the play button will be illuminated.
9)
Press the mode button and the module will reboot as per normal with the updated firmware.
