5
Installation Instructions
lube
Step 1
Step 3
Step 2
Tape
Glue
Back of handheld holder
1
2
3
4
[Step 1] Apply a generous amount of PTFE (plumber's)
tape to end of end of inlet fitting (9).
[Step 2] Insert inlet fitting into existing plumbing which
old shower arm was screwed into. Use allen wrench
provided to secure.
DO NOT OVERTIGHTEN.
[Step 3] Screw fitting (7) into inlet fitting (9).
DO NOT OVERTIGHTEN.
[Step 1] Screw shower riser (4) to shower pipe(11).
[Step 2] Slide escutcheon (6) onto Top-T (10).
[Step 3] Screw shower arm (3) onto shower riser (4).
Secure shower bar to fitting and secure with set screws.
Use level to assure shower pipe is straight and mark lower
diverter mount location.
Step 1
Step 3
Step 2
Step 1
Step 3
Step 4
Step 2
