5
Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
Assembly
Tools required: 6mm hex wrench
Tools required: 5mm hex wrench, 10mm wrench
Tools required: Phillips Screwdriver
Handlebar Assembly
Front Fender Assembly
Number Plate Assembly
1. Align handlebars vertically and horizontally
onto clamps (A&B). Install the 4 clamp bolts
(C) and washers; tighten even and securely
with a 6mm hex wrench (D). Check to ensure
handlebars are tight by applying pressure
before riding, handlebars should not move
backwards or forwards.
1. Align fender mount hole with fork hole and
install hardware using a 5mm hex wrench
and 10mm wrench. Do not over tighten.
1. Align the number plate with the holes in
the fork and install the screws with a Phillips
head screwdriver.
A
D
C
B
