5
Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
Assembly
Tools required: 5mm hex wrench, 10mm wrench
Handlebar Assembly
NOTE : The gap between the clamps (A&B) should be the same on both sides of the handlebar.
Tools required: Air/tire pump
air pressure maybe lost between the manufacture date and your
purchase date.
Using a hand pump with a Schrader-type valve and pressure gauge
not recommended to use pressurized system similar to the ones found
have much higher air capacity volumes.
INFLATION
tires to the recommended PSI called out on the tires. Replace the
valve caps.
ENSURE ALL TIRES ARE AT THE CORRECT PSI
BEFORE RIDING THE QUAD.
WARNING:
It is important to routinely check and maintain
tire pressure as this directly impacts the safety and performance
damage to the tires or the wheels.
REAR TIRE PSI: 30 MAX
1. Align handlebars vertically and horizontally
onto clamps (A&B). Install the 4 clamp bolts
5mm hex wrench (E) and 10mm wrench (F).
(C) and lock nuts (D) and hand tighten.
2. Tighten bolts evenly and securely with a
applying pressure before riding, handlebars
should not move backwards or forwards.
3. Check to ensure handlebars are tight by
B
A
E
C
D
F
