10.3 On/Off Switch
The Elliptical Cross-Trainer is
delivered with a
separate
power cable which has a moulded plug
already tted
and plug-in external power supply
adaptor. Plug the cable out of the adaptor into the
input socket at the front of the Elliptical Cross-
Trainer, then plug the power cable into the adaptor
and into a suitable mains socket and then switch on
the power.
Switch on the Elliptical Cross-Trainer via the on/off
(I / O) switch mounted at the front of the machine.
[See Figure AD]. The Console should begin its
boot-up cycle. The Series 3 Consoles will show a
message indicating it is initialising (which takes
approximately 2 minutes). This indicates that the
Elliptical Cross-Trainer is now ready for use.
NOTE
: If the Elliptical Cross-Trainer is not going to
be used straight away, then switch off and remove
the 13A plug from the socket.
CAUTION
- Ensure that the mains cable
is routed in such a way that it does not
create a potential hazard to users of the
or others persons in the vicinity.
Assembly, Operation & Parts Manual G-Range CV Pg
47
Installation
(Continued)
Figure AE
Location of Input Socket and On/Off Switch
Power
Input Socket
ON/OFF
Switch
On / Off Switch
