INITIAL SETUP
1
CONNECT INPUT DEVICE
On the Transmitter, plug in coax or optical cable
between your device (ie.DVD player/TV) into the
selected Optical or Coax port.
2
CONNECT OUTPUT DEVICE
On the Receiver, plug in coax or optical cable between
your output device (ie. amp) into the selected Optical
or Coax port.
3
SELECTOR SWITCH
Ensure selector switch on the Transmitter is in the
correct position for the chosen cable.
4
CONNECT RECEIVER & TRANSMITTER
Connect a CAT 5e cable between the transmitter and
receiver and plug in power to each end.
A green LED on the Cat 5e port should turn on to
indicate that the power is connected.
An amber LED on the Cat 5e port should turn on to
indicate if audio is passing through the extender set.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means (electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise) without express
written permission and consent from Pulse-Eight Limited.
© Copyright 2017 Pulse-Eight Limited. All Rights Reserved.
Version 1.0 - June 2017
Pulse-Eight Limited
8-12 Alder Hills . Poole . Dorset . BH12 4AL . UK
[email protected] | +44 (0)1202 413610
www.pulse-eight.com
