Pulsar VK63 Manual Download

Page: 7 / 9

English

BATTERY CHANGE

Battery life : Approx. 3 years
Battery

: SEIKO SR936SW

Years

If the chronograph is used for more than 60 minutes a day, the battery life may
be less than the specified period.

As the battery is inserted at the factory to check the function and performance
of the watch, its actual life once in your possession may be less than the speci-

fied period.

When the battery expires, be sure to replace it as soon as possible to prevent
any malfunction.

We recommend that you contact an AUTHORIZED PULSAR DEALER for battery
replacement.

Necessary procedure after battery change

Press and hold for 2 seconds

and then release it.

CROWN

Pull out to second click.

CROWN

After the battery is replaced with a new one, or in case any of the hands

should move improperly, follow the procedure below to reset the hands to

the “0” position.

Push back in to normal

position.

* The small second hand

will move in two-second

intervals for ten seconds.

* It is not necesarry to set the CHRONOGRAPH hands after the battery is

replaced with a new one.

Summary of Contents for VK63










Search results

Summary of Contents for VK63

Reviews:

Related manuals for VK63

Brands by name

Popular brands

Pulsar VK63, Manual

Search results

Summary of Contents for VK63

Reviews:

Related manuals for VK63

Brands by name

Popular brands