
www.pulsar.pl
PWB series
2
Features:
supply voltage ~200 - 240 V
DC 52 V
uninterruptible power supply
available models:
1,15 A; 2,3 A
high efficiency (up to 87%)
Built-in DC/DC converter allows reduce installation
costs and stabilise output voltage regardless of
battery charge status
battery charging and maintenance control
power supply dedicated for PoE power supply
systems
optional equipment: set of LED optical indication
PKAZ168, mounting plate DIN4
START function of manual switch to
battery power
LED optical indication
deep discharge battery protection (UVP)
battery output protection against short circuit
and reverse connection
protections:
SCP short circuit protection
OLP overload protection
surge protection
warranty
– 2 years from production date
TABLE OF CONTENTS:
1. Technical description.
1.1. General description
1.2. Block diagram
1.3. Description of PSU components and connectors
1.4. Specifications
2. Installation.
2.1. Requirements
2.2. Installation procedure
3. Operating status indication.
3.1. Optical indication
4. Maintenance
1. Technical description.
1.1. General description.
Switch mode buffer power supply units PWB are intended for continuous power supply to devices that require
stabilised voltage of 52 V (
e.g.
PoE power systems, PoE switches
).
Rozwiązanie posiada dodatkowy atut w
postaci stabilizacji napięcia wyjściowego bez względu na stan naładowania baterii. Built-in DC/DC converter allows
to reduce costs of installation by reducing number of required batteries. Additional advantage is output voltage
stabilisation regardless of battery charge status.
Table 1. Parameters of power supplies:
Model
Output voltage
AUX
Output current max.
Charging
voltage
Charging
current
PWB-52V1A
52 V
1,15 A
13,8 V
0,5 A
PWB-52V2A
52 V
2,3 A
27,6 V
0,5 A
In case of power failure, a battery back-up is activated immediately. PSU is constructed based on switch
mode PSU, with high energy efficiency. In addition, they are equipped with a START button allowing them to
be started from the battery (e.g. in the absence of mains power).