www.pulsar.pl
PSBS3512C
5
1.4 Technical parameters:
- electrical parameters (tab.3)
- mechanical parameters (tab.4)
- operation safety (tab.5)
- operation parameters (tab.6)
Electrical parameters (tab. 3)
Supply voltage
230V/AC (-15%/+10%)
Current consumption
0,39 A max.
Power frequency
50Hz
Supply power
49 W
Efficiency
69%
Output voltage
11,0 V÷ 13,8 V DC – buffer operation
10,0 V÷ 13,8 V DC – battery assisted operation
Output current
3,0A + 0,5A battery charging
2,5A + 1,0A battery charging
Output voltage setting, escalation and keeping
time
20ms / 30ms / 14ms
Voltage adjustment range
12,0 V÷ 14,5 V
Ripple voltage
50 mV p-p max.
Current consumption by PSU systems
20 mA – battery assisted operation
Battery charging current
0,5A / 1A - configuration with jumper I
BAT
Short-circuit protection SCP
200% ÷ 250% of supply power - limitation of current and/or fuse
failure in the battery circuit (fuse-element replacement required)
Overload protection OLP
110% ÷ 150% (@25ºC) of power supply - limitation with the PTC
automatic fuse, manual restart (the fault requires the
disconnection of the DC output circuit)
Protection of the battery circuit SCP and reverse
polarity protection
5,0 A - current limitation, F
BAT
fuse (failure requires replace of
the fuse-element)
Excessive discharge protection UVP
U<10,0 V (± 5%) – disconnection of (- BAT) battery,
configuration with jumper P
BAT
Technical outputs:
- FAC; output indicating failure of AC power supply
- FPS; technical output indicating operation status
of the power supply
- TAMPER output indicating the power-supply
casing opening
- OC type, 50mA max. normal status: level L (0V), failure: level
hi-Z, 10s time lag.
- OC type, 50mA max. normal status: level L (0V), failure: level
hi-Z (automatically recovered after returning correct operation)
- microswitch, NC contacts (close casing), 0,5A@50V DC (max.)
F
BAT
fuse
F
MAIN
fuse
F 5,0A / 250V
T 0,63A / 250V
Mechanical parameters (tab. 4).
Casing dimensions
235 x 305 x 98 (230 x 300 x 90+8) (WxHxD) [mm] (+/- 2)
Fixation
205 x 275 x Φ 6 x4 pcs (WxH)
Battery space
17Ah/12V (SLA) max.
Net/gross weight
2,90/3,10 kg
Casing color
RAL 9003
Closing
Cheese screw x 2 (at the front), lock assembly possible
Connectors
Power-supply: Φ0,63÷2,50 (AWG 22-10)
Outputs: Ф0,41÷1,63 (AWG 26-14),
Battery output BAT: 6,3F-2,5, 30cm,
TAMPER output: wires, 30cm
Notes
The casing is distant from the assembly surface so that cables can be installed
Operation safety (tab.5).
Protection class PN-EN 60950-1:2007
I (first)
Protection grade PN-EN 60529: 2002 (U)
IP20
Electrical strength of insulation:
- between input (network) circuit and output circuits of power-supply (I/P-O/P)
- between input circuit and PE protection circuit (I/P-FG)
- between output circuit and PE protection circuit (O/P-FG)
3000 V/AC min.
1500 V/AC min.
500 V/AC min.
Insulation resistance:
- between input circuit and output or protection circuit
100 MΩ, 500V/DC
