www.pulsar.pl
PSBEN2012B
BLACK POWER
19
5.3.2
LED Display Dimmer
„dIS"
LED display dimmer allows to dim the display if no buttons are pressed within 5 minutes.
If the display is
in the blackout mode, pressing any button will "reactivate" the display.
-
simultaneously press the „<,>” rightmost and leftmost buttons on the LED panel
-
the „tSt” parameter will be displayed
-
use the „<” or „>” buttons to display the „dIS” parameter
-
press „OK”
- the current status will be displayed
-
use the „<” or „>” buttons in order to set the status
On
– dimmer on
OFF
– dimmer off
- confirm by pressing
„OK”
- in order to return to the main menu, simult
aneously press the „<,>” rightmost
and leftmost buttons
5.3.3
Setting the communication address
„Adr”
applies to cooperation with PowerSecurity.
All power supplies are factory-set to address 1.
All the parameters responsible for communication between the PSU and the computer, namely the
address, parity and speed should have the same settings for both the PSU and the PowerSecurity program.
Communication address allows to identify power supply units in the same communication network.
- simultaneo
usly press the „<,>” rightmost and leftmost buttons
-
the „tSt” parameter will be displayed
-
use the „<” or „>” buttons to display the „Adr” parameter
