www.pulsar.pl
PSBEN10A12C
BLACK POWER
18
5.3.1
Battery test ON/OFF
„tSt”
The "tSt" function allows to enable or disable the test of the battery (Section 6.3) connected to the power
supply. When activated, the battery test occurs automatically if it is not blocked by the control system (section 6.3).
- simultaneously
press the „<,>” rightmost and leftmost buttons on the LED panel
-
the „tSt” parameter will be displayed
-
press „OK”
- the current settings will be displayed
-
use the „<” or „>” buttons to in order to set the status
On
–
battery test on
OFF
–
battery test off
-
approve your choice with the ‘OK’ button
-
in order to return to the main menu, simultaneously press the „<,>” rightmost
and leftmost buttons on the LED panel
Deactivating/activating the test with the STOP button on the PCB of the PSU.
During mains-powered PSU operation press the STOP button on the main board and hold it for 3 seconds.
The device will confirm the activation/deactivation:
testing off
– the tOF sign appears on the display
, single beep
testing on
– the tOn sign appears on the display
, double beep
Deactivating/activating the test is stored in the memory even after unplugging the device from
mains. The battery failure indication at the APS FLT output is automatically switched off. The
battery protection system against deep discharged remains on, though.
