11
ASSEMBLY
•
Place generator on a level surface.
•
Clean area around oil fill.
•
Remove oil fill cap and wipe dipstick clean.
•
Screw dipstick into filler neck. Remove dipstick and verify oil level is within safe operating range.
•
Add recommended engine oil as necessary.
(
See Add Engine Oil.
)
•
Install oil fill cap/dipstick and hand-tighten
.
Adding / Checking Engine Oil (See fig 4)
You must add oil before first operating this generator. Always check oil level before each
operation.
DO NOT USE E15 OR E85 FUEL IN THIS UNIT. IT IS A VIOLATION OF FEDERAL LAW AND
WILL DAMAGE THE UNIT AND VOID YOUR WARRANTY.
CAUTION!
Fig 5
Unleaded
Gasoline
Fig 4
10W30 OIL
