background image

21

English

* Before using the water resistance 5, 10, 15 or 20 bar watch in water, be sure the

crown is pushed in completely.
Do not operate the crown when the watch is wet or in water.  If used in sea water,
rinse the watch in fresh water and dry it completely.

* When taking a shower with the water resistance 5 bar watch, or taking a bath with

the water resistance 10, 15 or 20 bar watch, be sure to observe the following:
• Do not operate the crown when the watch is wet with soapy water or shampoo.
• If the watch is left in warm water, a slight time loss or gain may be caused.  This

condition, however, will be corrected when the watch returns to normal
temperature.

NOTE:

Pressure in bar is a test pressure and should not be considered as corresponding
to actual diving depth since swimming movement tends to increase the
pressure at a given depth.  Care should also be taken on diving into water.

Your watch works with
stable accuracy within a
temperature  range of 5

°

 C

and 35

°

 C (41

°

 F and 95

°

F).

TEMPERATURES

Temperatures over 50

°

 C (122

°

 F) or

below –5

°

  C (+23

°

  F) may cause a

slight time loss or gain or battery
leakage or shorten the battery life.
However, the above  conditions  will
be corrected when the watch returns
to normal temperature.

Summary of Contents for NX01

























Reviews: