Pulsar NoisePen Dosemeter User Manual
Page
16
Downloading a Measurement
Connect the NoisePen to AnalyzerPlus, when the instrument window appears in the
bottom left, select ‘Download’.
If there are measurements in the instrument a window will open listing the
measurements available for download. Measurements can be organised into categories
as desired.
Tick the ‘Open after download’ button if desired.
Either select a group of measurements to download and select ‘Download’ or double
click on a single measurement to download.
Measurements are downloaded to the PC.
Clearing the Memory
Clearing the memory will remove all the measurements from the NoisePen.
Connect the NoisePen to AnalyzerPlus. When the instrument window appears in the
bottom left, select ‘Configure’. Select the Controls tab and then select ‘Clear
Memory’. A confirmation window will appear, confirm as required.
Viewing Measurement Data
Measurements can be selected in the top left window of AnalyzerPlus, they can be
searched by selecting Instrument, Person, Place or Project.
Double click on a measurement to view. The data can now be reviewed and a report
created as required. Calibration data can be viewed by selecting the ‘Calibration
Information’ button.
Any overload (signal exceeding 140dB) will be displayed as a red ‘Overload’ at the top of
the measurement.
Right click on the measurement gives Export, Delete or Create a Group options.
To close a measurement, either click the small cross on the right of the measurement
tab, or centre press the measurement tab.
