Pulsar MBT9600 Instruction Manual Download Page 3

September 1997

i

e recommend that you become acquainted with the information in this manual before

installing your new MBT9600 Four-Wire Modem. Failure to do so may result in damage to the
modem or relay equipment, and may affect the equipment warranty. 

PULSAR does not assume liability arising out of the application or use of any product or circuit
described herein. PULSAR reserves the right to make changes to any products herein to improve
reliability, function or design. Specifications and information herein are subject to change
without notice. All possible contingencies which may arise during installation, operation, or
maintenance, and all details and variations of this equipment do not purport to be covered by
these instructions. If you desire further information regarding a particular installation,
operation, or maintenance of equipment, please contact your local Pulsar Technologies, Inc.
representative. 

Copyright © 
By Pulsar Technologies, Inc.
Published 1997
ALL RIGHTS RESERVED

PULSAR does not convey any license under its patent rights nor the rights of others.

!

IMPORTANT

W

Summary of Contents for MBT9600











Reviews: