2
Features:
•
DC 13,8V/3A uninterruptible power supply
•
fitting battery: 17Ah/12V
•
wide range of mains supply: 176÷264V
•
high efficiency 76%
•
battery charging and maintenance control
•
excessive discharging (UVP) protection
•
battery charge current 0,5A
•
battery output full protection against short-
circuit and reverse polarity connection
•
LED indication
•
protections:
•
SCP short-circuit protection
•
OVP overvoltage protection
•
overvoltage protection (
input
AC)
•
against sabotage
•
overload protection (OLP)
CONTENTS:
1. Technical description.
1.1 General description
1.2 Block diagram
1.3 Description of elements and connectors of the PSU
1.4 Specifications
2. Installation.
2.1 Requirements
2.2 Installation procedure
3. Operating status indication.
3.1 LED indication of operating status
4. Operation and use.
4.1 Overload or short circuit of the PSU output (SCP on)
4.2 Disconnection of discharged battery
4.3 Maintenance
1. Technical description.
1.1 General description.
A buffer PSU intended for uninterrupted supply to devices that require stabilised voltage of 12 V DC (+/-
15%). The PSU provides voltage of U=13,8 V DC with output current of I=3A + 0,5A for battery charging. In case
of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode
PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can
accommodate a 17Ah/12V battery. A micro switch indicates door opening (front cover).
During normal operation, the total current drawn by the equipment may not exceed I = 3 A;
Maximum battery charging current: 0.5 A. Total device c battery: 3.5 A max.
OPTIONAL POWER SUPPLY CONFIGURATIONS:
(visualisation available at:
www.pulsar.pl)
BATTERY 17Ah:
1.
Buffer power supply unit HPSB 13,8V/3x1A/17Ah.
- HPS LB4 3x1,0A (AWZ576 or AWZ575) + 17Ah
2. Buffer power supply unit HPSB 13,8V/6x0,5A/17Ah.
- HPS LB8 6x0,5A (AWZ580 or AWZ578) + 17Ah
3. Buffer power supply unit HPSB 13,8V/12V/3A/17Ah.
- HPS RN500 (13,8V/12V) + 17Ah
4. Buffer power supply unit HPSB 13,8V/12V/3x1A/17Ah.
- HPS RN500 (13,8V/12V) + LB4 3x1,0A (AWZ576 or AWZ575) + 17Ah
5. Buffer power supply unit HPSB 13,8V/5V÷7,4V/2A/17Ah.
HPS DCDC20 (5V÷7,4V/2A) + 17Ah